The Ethical Way to Grow Your Fan Base Effectively

How to Get People to Subscribe to Your YouTube Channel

Click here

##### Richard Bennett

Oct 26, 2023• Proven solutions

0

The following is a step-by-step tutorial on how to get more subscribers by asking the right way. People are more likely to do something if you give them a bit of a nudge, and that includes subscribing to your YouTube channel.

There are people who think that if people like their videos they’ll subscribe, so they shouldn’t bother people by asking. This is, simply put, wrong. When people are browsing YouTube their minds are on what video they want to watch next, not whether or not they want to subscribe – unless you remind them.

1. What is a ‘Call To Action’?
2. A More Effective Way of Asking for Subscribers
   1. Step 1: How to Hook the Viewer
   2. Step 2: Get to The Point Quickly
   3. Step 3: Create a Moment - Make Subscribing Part of the Experience

What is a ‘Call To Action’?

It has become the norm for YouTubers to ask viewers to subscribe in their sign-offs. A typical CTA (‘call to action’) goes something like this:

“Thanks for watching. If you liked this video, make sure to subscribe for more!”

That’s great. At the end of a video is a good place to ask people to subscribe, but is it the best and only place you should be reminding them? If you take a peek at your analytics and you might find that most of your viewers aren’t watching to the ends of your videos (people have short attention spans).

A More Effective Way of Asking For Subscribers

Collins Key is one YouTuber who has mastered asking for subscribers early on, and given that he has over 7 million subscribers himself I’d say it’s working out. Check out the technique in this video collab with Brooklyn and Bailey:

Step 1: How to Hook The Viewer

As you can see, the video starts with a ‘flash forward’ to one of the twins saying the heater is on fire and then a reminder of what’s going to happen later – the heater catching fire – is written in the top left of the screen so it stays on the viewers’ mind. This is one way in which the viewer is immediately hooked.

#### Step 2: Get to The Point Quickly

Shortly after, while still in the first 30 seconds of the video, Collins gets right to the point and introduces the Twin Telepathy Challenge promised in the title of the video. The hook with the heater catching fire is effective, but it’s not essential. It happens to suit Collins’ style, and it happens to have happened. Getting to the main point of the video quickly – usually in the first 15 seconds, not the first 30 (it’s in the first 15 seconds that most viewers click away) – is vital. People click on videos for a reason, and if they don’t see a sign of that payoff quickly they’ll leave.

Step 3: Create A Moment - Make Subscribing Part of the Experience

It’s only after hooking the viewer in and reiterating the promise of the title that Collins asks viewers to subscribe. The really clever thing about how he asks is that he carves out time in the video for the viewer to comply with his request. He gives 5 seconds and does a countdown.

Click here

Collins Key has been one of the fastest-growing channels on YouTube. He does not implement this strategy in every video, but it’s not a stretch to think it’s had something to do with his success. Instead of simply asking you to subscribe at the end of the video, he creates a part of the video early on – before people who don’t watch until the end will have clicked away – where you feel as if you’re ‘supposed to’ subscribe.

Polish Your YouTube Videos with Filmora

Even with the above tricks, you may not get the subscribers as you wish unless you can make sure your videos and contents are of high quality. As YouTube is getting more and more popular and more YouTubers are competing for subscribers, you will need to polish your YouTube videos.

As one of the most widely used video editing software in YouTube video editing, Filmora video editor provides lots of templates and effects with an intuitive interface, which saves much time. Its features like motion tracking, audio ducking, keyframing, color matching and effects will help make your video impressive enough to get pepople to subscribe to your channel.

Here is a tutorial video about how to use Filmora to edit your YouTube video. Check it out and try Filmora if you are interested.

Click here

That's how you can get more YouTube subscribers by asking the right way. You may follow the instructions and try it yourself. Do not forget to [track your YouTube subscribers in real time](https://tools.techidaily.com/wondershare/filmora/download/) to make necessary adjustments.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

The following is a step-by-step tutorial on how to get more subscribers by asking the right way. People are more likely to do something if you give them a bit of a nudge, and that includes subscribing to your YouTube channel.

There are people who think that if people like their videos they’ll subscribe, so they shouldn’t bother people by asking. This is, simply put, wrong. When people are browsing YouTube their minds are on what video they want to watch next, not whether or not they want to subscribe – unless you remind them.

1. What is a ‘Call To Action’?
2. A More Effective Way of Asking for Subscribers
   1. Step 1: How to Hook the Viewer
   2. Step 2: Get to The Point Quickly
   3. Step 3: Create a Moment - Make Subscribing Part of the Experience

## What is a 'Call To Action'?

It has become the norm for YouTubers to ask viewers to subscribe in their sign-offs. A typical CTA (‘call to action’) goes something like this:

“Thanks for watching. If you liked this video, make sure to subscribe for more!”

That’s great. At the end of a video is a good place to ask people to subscribe, but is it the best and only place you should be reminding them? If you take a peek at your analytics and you might find that most of your viewers aren’t watching to the ends of your videos (people have short attention spans).

A More Effective Way of Asking For Subscribers

Collins Key is one YouTuber who has mastered asking for subscribers early on, and given that he has over 7 million subscribers himself I’d say it’s working out. Check out the technique in this video collab with Brooklyn and Bailey:

Step 1: How to Hook The Viewer

As you can see, the video starts with a ‘flash forward’ to one of the twins saying the heater is on fire and then a reminder of what’s going to happen later – the heater catching fire – is written in the top left of the screen so it stays on the viewers’ mind. This is one way in which the viewer is immediately hooked.

Step 2: Get to The Point Quickly

Shortly after, while still in the first 30 seconds of the video, Collins gets right to the point and introduces the Twin Telepathy Challenge promised in the title of the video. The hook with the heater catching fire is effective, but it’s not essential. It happens to suit Collins’ style, and it happens to have happened. Getting to the main point of the video quickly – usually in the first 15 seconds, not the first 30 (it’s in the first 15 seconds that most viewers click away) – is vital. People click on videos for a reason, and if they don’t see a sign of that payoff quickly they’ll leave.

Step 3: Create A Moment - Make Subscribing Part of the Experience

It’s only after hooking the viewer in and reiterating the promise of the title that Collins asks viewers to subscribe. The really clever thing about how he asks is that he carves out time in the video for the viewer to comply with his request. He gives 5 seconds and does a countdown.

Collins Key has been one of the fastest-growing channels on YouTube. He does not implement this strategy in every video, but it’s not a stretch to think it’s had something to do with his success. Instead of simply asking you to subscribe at the end of the video, he creates a part of the video early on – before people who don’t watch until the end will have clicked away – where you feel as if you’re ‘supposed to’ subscribe. ### Polish Your YouTube Videos with Filmora

Even with the above tricks, you may not get the subscribers as you wish unless you can make sure your videos and contents are of high quality. As YouTube is getting more and more popular and more YouTubers are competing for subscribers, you will need to polish your YouTube videos.

As one of the most widely used video editing software in YouTube video editing, Filmora video editor provides lots of templates and effects with an intuitive interface, which saves much time. Its features like motion tracking, audio ducking, keyframing, color matching and effects will help make your video impressive enough to get pepople to subscribe to your channel.

Here is a tutorial video about how to use Filmora to edit your YouTube video. Check it out and try Filmora if you are interested.

That’s how you can get more YouTube subscribers by asking the right way. You may follow the instructions and try it yourself. Do not forget to track your YouTube subscribers in real time to make necessary adjustments.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

The following is a step-by-step tutorial on how to get more subscribers by asking the right way. People are more likely to do something if you give them a bit of a nudge, and that includes subscribing to your YouTube channel.

There are people who think that if people like their videos they’ll subscribe, so they shouldn’t bother people by asking. This is, simply put, wrong. When people are browsing YouTube their minds are on what video they want to watch next, not whether or not they want to subscribe – unless you remind them.

1. What is a ‘Call To Action’?
2. A More Effective Way of Asking for Subscribers
   1. Step 1: How to Hook the Viewer
   2. Step 2: Get to The Point Quickly
   3. Step 3: Create a Moment - Make Subscribing Part of the Experience

What is a ‘Call To Action’?

It has become the norm for YouTubers to ask viewers to subscribe in their sign-offs. A typical CTA (‘call to action’) goes something like this:

“Thanks for watching. If you liked this video, make sure to subscribe for more!”

That’s great. At the end of a video is a good place to ask people to subscribe, but is it the best and only place you should be reminding them? If you take a peek at your analytics and you might find that most of your viewers aren’t watching to the ends of your videos (people have short attention spans).

A More Effective Way of Asking For Subscribers

Collins Key is one YouTuber who has mastered asking for subscribers early on, and given that he has over 7 million subscribers himself I’d say it’s working out. Check out the technique in this video collab with Brooklyn and Bailey:

Step 1: How to Hook The Viewer

As you can see, the video starts with a ‘flash forward’ to one of the twins saying the heater is on fire and then a reminder of what’s going to happen later – the heater catching fire – is written in the top left of the screen so it stays on the viewers’ mind. This is one way in which the viewer is immediately hooked.

#### Step 2: Get to The Point Quickly

Shortly after, while still in the first 30 seconds of the video, Collins gets right to the point and introduces the Twin Telepathy Challenge promised in the title of the video. The hook with the heater catching fire is effective, but it’s not essential. It happens to suit Collins’ style, and it happens to have happened. Getting to the main point of the video quickly – usually in the first 15 seconds, not the first 30 (it’s in the first 15 seconds that most viewers click away) – is vital. People click on videos for a reason, and if they don’t see a sign of that payoff quickly they’ll leave.

Step 3: Create A Moment - Make Subscribing Part of the Experience

It’s only after hooking the viewer in and reiterating the promise of the title that Collins asks viewers to subscribe. The really clever thing about how he asks is that he carves out time in the video for the viewer to comply with his request. He gives 5 seconds and does a countdown.

Collins Key has been one of the fastest-growing channels on YouTube. He does not implement this strategy in every video, but it’s not a stretch to think it’s had something to do with his success. Instead of simply asking you to subscribe at the end of the video, he creates a part of the video early on – before people who don’t watch until the end will have clicked away – where you feel as if you’re ‘supposed to’ subscribe.

Polish Your YouTube Videos with Filmora

Even with the above tricks, you may not get the subscribers as you wish unless you can make sure your videos and contents are of high quality. As YouTube is getting more and more popular and more YouTubers are competing for subscribers, you will need to polish your YouTube videos.

As one of the most widely used video editing software in YouTube video editing, Filmora video editor provides lots of templates and effects with an intuitive interface, which saves much time. Its features like motion tracking, audio ducking, keyframing, color matching and effects will help make your video impressive enough to get pepople to subscribe to your channel.

Here is a tutorial video about how to use Filmora to edit your YouTube video. Check it out and try Filmora if you are interested.

That’s how you can get more YouTube subscribers by asking the right way. You may follow the instructions and try it yourself. Do not forget to track your YouTube subscribers in real time to make necessary adjustments.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

The following is a step-by-step tutorial on how to get more subscribers by asking the right way. People are more likely to do something if you give them a bit of a nudge, and that includes subscribing to your YouTube channel.

There are people who think that if people like their videos they’ll subscribe, so they shouldn’t bother people by asking. This is, simply put, wrong. When people are browsing YouTube their minds are on what video they want to watch next, not whether or not they want to subscribe – unless you remind them.

1. What is a ‘Call To Action’?
2. A More Effective Way of Asking for Subscribers
   1. Step 1: How to Hook the Viewer
   2. Step 2: Get to The Point Quickly
   3. Step 3: Create a Moment - Make Subscribing Part of the Experience

## What is a 'Call To Action'?

It has become the norm for YouTubers to ask viewers to subscribe in their sign-offs. A typical CTA (‘call to action’) goes something like this:

“Thanks for watching. If you liked this video, make sure to subscribe for more!”

That’s great. At the end of a video is a good place to ask people to subscribe, but is it the best and only place you should be reminding them? If you take a peek at your analytics and you might find that most of your viewers aren’t watching to the ends of your videos (people have short attention spans).

A More Effective Way of Asking For Subscribers

Collins Key is one YouTuber who has mastered asking for subscribers early on, and given that he has over 7 million subscribers himself I’d say it’s working out. Check out the technique in this video collab with Brooklyn and Bailey:

Step 1: How to Hook The Viewer

As you can see, the video starts with a ‘flash forward’ to one of the twins saying the heater is on fire and then a reminder of what’s going to happen later – the heater catching fire – is written in the top left of the screen so it stays on the viewers’ mind. This is one way in which the viewer is immediately hooked.

Step 2: Get to The Point Quickly

Shortly after, while still in the first 30 seconds of the video, Collins gets right to the point and introduces the Twin Telepathy Challenge promised in the title of the video. The hook with the heater catching fire is effective, but it’s not essential. It happens to suit Collins’ style, and it happens to have happened. Getting to the main point of the video quickly – usually in the first 15 seconds, not the first 30 (it’s in the first 15 seconds that most viewers click away) – is vital. People click on videos for a reason, and if they don’t see a sign of that payoff quickly they’ll leave.

Step 3: Create A Moment - Make Subscribing Part of the Experience

It’s only after hooking the viewer in and reiterating the promise of the title that Collins asks viewers to subscribe. The really clever thing about how he asks is that he carves out time in the video for the viewer to comply with his request. He gives 5 seconds and does a countdown.

Collins Key has been one of the fastest-growing channels on YouTube. He does not implement this strategy in every video, but it’s not a stretch to think it’s had something to do with his success. Instead of simply asking you to subscribe at the end of the video, he creates a part of the video early on – before people who don’t watch until the end will have clicked away – where you feel as if you’re ‘supposed to’ subscribe.

Click here

### Polish Your YouTube Videos with Filmora

Even with the above tricks, you may not get the subscribers as you wish unless you can make sure your videos and contents are of high quality. As YouTube is getting more and more popular and more YouTubers are competing for subscribers, you will need to polish your YouTube videos.

As one of the most widely used video editing software in YouTube video editing, Filmora video editor provides lots of templates and effects with an intuitive interface, which saves much time. Its features like motion tracking, audio ducking, keyframing, color matching and effects will help make your video impressive enough to get pepople to subscribe to your channel.

Here is a tutorial video about how to use Filmora to edit your YouTube video. Check it out and try Filmora if you are interested.

That’s how you can get more YouTube subscribers by asking the right way. You may follow the instructions and try it yourself. Do not forget to track your YouTube subscribers in real time to make necessary adjustments.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

From Capture to Share: Proven Methods for Live 360° Video on Youtube

How to live streaming 360 video to youtube

Richard Bennett

Mar 27, 2024• Proven solutions

• Part1.Stream 360 to Youtube via Ricoh Theta S and OBS on PC
• Part2.Live Stream from Allie 360 Camera to YouTube on Mobile

1. Stream 360 to Youtube via Ricoh Theta S and OBS on PC

Step 1: First of all you need to get ready with your Ricoh Theta S 360 camera unit.

Step 2: Now visit the official website of Theta 360 in order to download your dedicated live streaming application.

**Step 3:** Get your application and install it on your Mac or PC as per need.

Step 4: It is time to plug in to your Ricoh Theta S 360 camera using your PC.

**Step 5:** Now select your device ‘Ricoh Theta S’ and then hit Okay.

**Step 6:** You will find option to register to application with your respective device. Select and hit register.

Step 7: As soon as your registration process is complete then un-plug your USB cable.

Step 8: It is time to turn the Ricoh Theta device to Live Mode; you simple need to press the top power and lower video button simultaneously to directly switch to the live mode.

Step 9: Once your device enters into Live Stream mode then a Led will start blinking on your device that represents your device is live at this moment.

Step 10: Now you need to plug in the USB cable again with your computer.

Step 11: Visit the official site of OBS and download your software; install it on your system.

Step 12: Go to create scene option and then switch to create sources.

Step 13: Select video capture device as your source from drop down menu.

Step 14: Now from available list select Theta UVC as your active video capture source.

Step 15: You need to adjust screen as per your requirements.

Step 16: Now move to YouTube and then hit New Live Events option.

Step 17: Complete the basic information.

Step 18: You need to move to advanced settings now; select 360 live stream option and then create event.

Step 19: Now complete the ingesting settings and finally select create new stream option.

**Step 20:** As soon as your event is created then you will be able to find your stream name on screen, copy it and simply paste it on OBS window.

Step 21: It is time to return to OBS settings and then you need to paste that copied name on stream key option.

Step 22: Once all above settings are complete then click start stream option from your OBS window and you will soon be able to find your 360 live on YouTube.

 ## 2.Live Stream from Allie 360 Camera to YouTube on Mobile

Step 1: Get ready with your Allie 360 camera unit.

Step 2: Visit YouTube and then hit the option to create your live event.

Step 3: It is time to download your Allie Application and then get it installed on your device.

• Prefer to use this link if you are working on iOS: https://itunes.apple.com/app/allie-home/id1063986074
• Android users need to visit: https://play.google.com/store/apps/details?id=com.icrealtime.allie

Step 4: As soon as you have downloaded your app then simply turn on the Bluetooth, Wi-Fi and air plane mode on your device.

Step 5: Simply open your Allie application and then connect your camera.

Step 6: Now users need to hit stream icon on screen.

Step 7: You will be asked to fill the necessary information about your video. It is also possible to make adjustments regarding video quality. Once you are done with all required settings then hit Submit option.

**Step 8:** Soon your video will become live; note that you can also share your live video via SNS platform with other viewers.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

• Part1.Stream 360 to Youtube via Ricoh Theta S and OBS on PC
• Part2.Live Stream from Allie 360 Camera to YouTube on Mobile

## 1\. Stream 360 to Youtube via Ricoh Theta S and OBS on PC

Step 1: First of all you need to get ready with your Ricoh Theta S 360 camera unit.

Step 2: Now visit the official website of Theta 360 in order to download your dedicated live streaming application.

**Step 3:** Get your application and install it on your Mac or PC as per need.

Step 4: It is time to plug in to your Ricoh Theta S 360 camera using your PC.

Step 5: Now select your device ‘Ricoh Theta S’ and then hit Okay.

Step 6: You will find option to register to application with your respective device. Select and hit register.

Step 7: As soon as your registration process is complete then un-plug your USB cable.

Step 8: It is time to turn the Ricoh Theta device to Live Mode; you simple need to press the top power and lower video button simultaneously to directly switch to the live mode.

Click here

**Step 9:** Once your device enters into Live Stream mode then a Led will start blinking on your device that represents your device is live at this moment.

**Step 10:** Now you need to plug in the USB cable again with your computer.

Step 11: Visit the official site of OBS and download your software; install it on your system.

Step 12: Go to create scene option and then switch to create sources.

**Step 13:** Select video capture device as your source from drop down menu.

Click here

**Step 14:** Now from available list select Theta UVC as your active video capture source.

Step 15: You need to adjust screen as per your requirements.

**Step 16:** Now move to YouTube and then hit New Live Events option.

**Step 17:** Complete the basic information.

Step 18: You need to move to advanced settings now; select 360 live stream option and then create event.

Step 19: Now complete the ingesting settings and finally select create new stream option.

**Step 20:** As soon as your event is created then you will be able to find your stream name on screen, copy it and simply paste it on OBS window.

**Step 21:** It is time to return to OBS settings and then you need to paste that copied name on stream key option.

Click here

**Step 22:** Once all above settings are complete then click start stream option from your OBS window and you will soon be able to find your 360 live on YouTube.

 ## 2.Live Stream from Allie 360 Camera to YouTube on Mobile

Step 1: Get ready with your Allie 360 camera unit.

Step 2: Visit YouTube and then hit the option to create your live event.

Step 3: It is time to download your Allie Application and then get it installed on your device.

• Prefer to use this link if you are working on iOS: https://itunes.apple.com/app/allie-home/id1063986074
• Android users need to visit: https://play.google.com/store/apps/details?id=com.icrealtime.allie

Step 4: As soon as you have downloaded your app then simply turn on the Bluetooth, Wi-Fi and air plane mode on your device.

**Step 5:** Simply open your Allie application and then connect your camera.

Step 6: Now users need to hit stream icon on screen.

Click here

**Step 7:** You will be asked to fill the necessary information about your video. It is also possible to make adjustments regarding video quality. Once you are done with all required settings then hit Submit option.

Step 8: Soon your video will become live; note that you can also share your live video via SNS platform with other viewers.


Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

• Part1.Stream 360 to Youtube via Ricoh Theta S and OBS on PC
• Part2.Live Stream from Allie 360 Camera to YouTube on Mobile

## 1\. Stream 360 to Youtube via Ricoh Theta S and OBS on PC

Step 1: First of all you need to get ready with your Ricoh Theta S 360 camera unit.

Step 2: Now visit the official website of Theta 360 in order to download your dedicated live streaming application.

**Step 3:** Get your application and install it on your Mac or PC as per need.

Step 4: It is time to plug in to your Ricoh Theta S 360 camera using your PC.

**Step 5:** Now select your device ‘Ricoh Theta S’ and then hit Okay.

Step 6: You will find option to register to application with your respective device. Select and hit register.

**Step 7:** As soon as your registration process is complete then un-plug your USB cable.

Step 8: It is time to turn the Ricoh Theta device to Live Mode; you simple need to press the top power and lower video button simultaneously to directly switch to the live mode.

**Step 9:** Once your device enters into Live Stream mode then a Led will start blinking on your device that represents your device is live at this moment.

Step 10: Now you need to plug in the USB cable again with your computer.

Step 11: Visit the official site of OBS and download your software; install it on your system.

Step 12: Go to create scene option and then switch to create sources.

Step 13: Select video capture device as your source from drop down menu.

Step 14: Now from available list select Theta UVC as your active video capture source.

**Step 15:** You need to adjust screen as per your requirements.

Step 16: Now move to YouTube and then hit New Live Events option.

Step 17: Complete the basic information.

Step 18: You need to move to advanced settings now; select 360 live stream option and then create event.

Step 19: Now complete the ingesting settings and finally select create new stream option.

Click here

**Step 20:** As soon as your event is created then you will be able to find your stream name on screen, copy it and simply paste it on OBS window.

Step 21: It is time to return to OBS settings and then you need to paste that copied name on stream key option.

Step 22: Once all above settings are complete then click start stream option from your OBS window and you will soon be able to find your 360 live on YouTube.


Click here

## 2.Live Stream from Allie 360 Camera to YouTube on Mobile

Step 1: Get ready with your Allie 360 camera unit.

Step 2: Visit YouTube and then hit the option to create your live event.

Step 3: It is time to download your Allie Application and then get it installed on your device.

• Prefer to use this link if you are working on iOS: https://itunes.apple.com/app/allie-home/id1063986074
• Android users need to visit: https://play.google.com/store/apps/details?id=com.icrealtime.allie

Step 4: As soon as you have downloaded your app then simply turn on the Bluetooth, Wi-Fi and air plane mode on your device.

Click here

**Step 5:** Simply open your Allie application and then connect your camera.

Step 6: Now users need to hit stream icon on screen.

Step 7: You will be asked to fill the necessary information about your video. It is also possible to make adjustments regarding video quality. Once you are done with all required settings then hit Submit option.

Step 8: Soon your video will become live; note that you can also share your live video via SNS platform with other viewers.

 Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

• Part1.Stream 360 to Youtube via Ricoh Theta S and OBS on PC
• Part2.Live Stream from Allie 360 Camera to YouTube on Mobile

Click here

## 1\. Stream 360 to Youtube via Ricoh Theta S and OBS on PC

Step 1: First of all you need to get ready with your Ricoh Theta S 360 camera unit.

Step 2: Now visit the official website of Theta 360 in order to download your dedicated live streaming application.

**Step 3:** Get your application and install it on your Mac or PC as per need.

Step 4: It is time to plug in to your Ricoh Theta S 360 camera using your PC.

Step 5: Now select your device ‘Ricoh Theta S’ and then hit Okay.

Step 6: You will find option to register to application with your respective device. Select and hit register.

Step 7: As soon as your registration process is complete then un-plug your USB cable.

Step 8: It is time to turn the Ricoh Theta device to Live Mode; you simple need to press the top power and lower video button simultaneously to directly switch to the live mode.

**Step 9:** Once your device enters into Live Stream mode then a Led will start blinking on your device that represents your device is live at this moment.

**Step 10:** Now you need to plug in the USB cable again with your computer.

Step 11: Visit the official site of OBS and download your software; install it on your system.

Step 12: Go to create scene option and then switch to create sources.

**Step 13:** Select video capture device as your source from drop down menu.

Step 14: Now from available list select Theta UVC as your active video capture source.

**Step 15:** You need to adjust screen as per your requirements.

**Step 16:** Now move to YouTube and then hit New Live Events option.

Step 17: Complete the basic information.

Step 18: You need to move to advanced settings now; select 360 live stream option and then create event.

Step 19: Now complete the ingesting settings and finally select create new stream option.

Step 20: As soon as your event is created then you will be able to find your stream name on screen, copy it and simply paste it on OBS window.

**Step 21:** It is time to return to OBS settings and then you need to paste that copied name on stream key option.

Click here

**Step 22:** Once all above settings are complete then click start stream option from your OBS window and you will soon be able to find your 360 live on YouTube.

## 2.Live Stream from Allie 360 Camera to YouTube on Mobile

Step 1: Get ready with your Allie 360 camera unit.

Step 2: Visit YouTube and then hit the option to create your live event.

Step 3: It is time to download your Allie Application and then get it installed on your device.

• Prefer to use this link if you are working on iOS: https://itunes.apple.com/app/allie-home/id1063986074
• Android users need to visit: https://play.google.com/store/apps/details?id=com.icrealtime.allie

Step 4: As soon as you have downloaded your app then simply turn on the Bluetooth, Wi-Fi and air plane mode on your device.

Step 5: Simply open your Allie application and then connect your camera.

**Step 6:** Now users need to hit stream icon on screen.

Click here

**Step 7:** You will be asked to fill the necessary information about your video. It is also possible to make adjustments regarding video quality. Once you are done with all required settings then hit Submit option.

Click here

**Step 8:** Soon your video will become live; note that you can also share your live video via SNS platform with other viewers.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett