Acoustic Mastery: Secrets for Exceptional Audio Capture

10 Recording Tips for Recording Audio with High Quality

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

Allavsoft Batch Download Online Videos, Music Offline to MP4, MP3, MOV, etc format

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

VSDC Pro Video Editor is a light professional non-linear video editing suite for creating a movie of any complexity. It supports the most popular video/audio formats and codecs, including 4K, HD and GoPro videos. Preconfigured profiles make the creation of videos for various multimedia and mobile devices absolutely hassle-free.

Key features:

• Import from any devices and cams, including GoPro and drones. All formats supported. Сurrently the only free video editor that allows users to export in a new H265/HEVC codec, something essential for those working with 4K and HD.
• Everything for hassle-free basic editing: cut, crop and merge files, add titles and favorite music
• Visual effects, advanced color correction and trendy Instagram-like filters
• All multimedia processing done from one app: video editing capabilities reinforced by a video converter, a screen capture, a video capture, a disc burner and a YouTube uploader
• Non-linear editing: edit several files with simultaneously
• Easy export to social networks: special profiles for YouTube, Facebook, Vimeo, Twitter and Instagram
• High quality export – no conversion quality loss, double export speed even of HD files due to hardware acceleration
• Stabilization tool will turn shaky or jittery footage into a more stable video automatically.
• Essential toolset for professional video editing: blending modes, Mask tool, advanced multiple-color Chroma Key

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

LYRX is an easy-to-use karaoke software with the professional features karaoke hosts need to perform with precision. LYRX is karaoke show hosting software that supports all standard karaoke file types as well as HD video formats, and it’s truly fun to use.
LYRX Karaoke Software MAC/WINDOWS (Includes Activation For 3 Machines)

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

4. Block wind from reaching your microphone

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Oct 26, 2023• Proven solutions

0

Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.

1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound

Bonus Tip-Record Your Audio with Wondershare Filmora

Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.

1. Silence everything you don’t want your microphone to record

When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.

2. Put your mobile phone in airplane mode

Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.

3. Minimize echo

If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.

Click here

### **4\. Block wind from reaching your microphone**

Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.

5. Upgrade your microphone

As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.

Need help with deciding on a microphone to buy? Check out our recommended list of microphones.

6. Adjust your levels

Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.

7. Start with a sound cue if you’re planning to do some syncing in post

If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.

8. Get close to the sound

Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.

9. ADR

When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.

10. Record Ambient Sound

Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.

DLNow Video Downloader

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Unlocking Views with Optimal Thumbnail Design

What’s the Best YouTube Thumbnail Size?

Richard Bennett

Dec 30, 2022• Proven solutions

0

Making better YouTube thumbnails will help you get more views, and knowing the best YouTube thumbnail size is part of that. There are millions of videos on YouTube, so if you want the audience to click on yours, then you need to make a great first impression.

1. What’s the ideal YouTube thumbnail Size and Dimension?
2. Tips for Perfect Thumbnails
3. Making Better Thumbnails for YouTube

1. What’s the ideal YouTube thumbnail Size and Dimension?

An essential thing that every YouTube video developer needs to know is about the selection of the right side of the thumbnail for any video. As per the guidelines circulated by Google itself, the most appropriate size for the thumbnail image is 1280x720 pixels, where the recommended minimal pixel width is 640 pixels. Generally, the 16:9 ratio is considered as an ideal choice for Most of YouTube previews and players.

Here is one interesting thing that you need to know; the thumbnail of videos appears smaller during searches, but it naturally grows to the full size of a video during suggestions. Now the fact is that upscaling of images often loses the quality of content, whereas it is much easier to downscale larger images into smaller ones. Hence, the best idea is to use large size images so that this search and suggestion based scaling needs can be well accomplished.

You May Also Like:
Top 12 Best Free YouTube Thumbnail Makers >>
How to Download YouTube Thumbnail in 3 Ways [Online/Win/Mac] >>

2. Tips for Perfect Thumbnails

So, if you are ready to add thumbnails to your videos, then it is time to learn a few essential tips to do this task with improved impact. You need to ignore the blurry details and boost the eye-catching ones. Here are a few essential tips for developing the best videos with an impressive selection of thumbnail images:

YouTube’s Default Thumbnails

When you upload your video on YouTube, the platform itself gives you suggestions about thumbnails, and they are directly picked up from your own video. Although the idea is good and original, these thumbnails use to be of low quality with blur details. Hope! You don’t want to lose your audience with this bad selection.

Custom Thumbnails

This is probably the best choice for your customized videos, and the interesting thing is that here you can control everything manually with lots of useful effects.

First of all, you need to open your video on YouTube and then scrub a useful still from your video that you wish to use as a thumbnail.

Now, you need to take a screenshot of this particular instance of your video file. The best part is that most of the operating systems allow users to enjoy several shortcuts to complete this task. For example:

Mac users need to press Command+Shift+4 and then simply highlight the area that you want to include in your screenshot with the help of a frame. The system will automatically save your selected area to your desktop in the form of an image.

Window users are advised to access Windows Key with Print Screen option to get their desired screenshot.

Once you are ready with your video specific still image, then simply get it uploaded on YouTube using the edit video page.

3. Making Better Thumbnails for YouTube

The best part is to access some photo editing software tool to edit your image the way you like. You can use an advanced tool like Photoshop or a free online tool like Canva.

• Focus on Size:

It is always advised to create thumbnail images with standard video file size; the most commonly used standard size range is 1980x1080 or 1280x720. Images having a size smaller than this range may often appear blurry.

• Add Text:

The best idea is to use text-based editing for your thumbnail images and preferably add the title of your video to this image. It will naturally attract more viewers.

• Borders matter:

Professionals recommend adding borders around thumbnail images but do not try to make it too thick rather, try to make it noticeable with fine details.

• Background editing:

Most of the expert video thumbnail developers prefer to change the impact of thumbnail background by simply replacing the background color with solid colors. It will definitely attract more viewers and will bring major attention to the major subject.

• Test it before uploading:

Before uploading your customized thumbnail to your YouTube channel, prefer to check its final view. Zoom in to check the appearance of the thumbnail image on the larger screen, and it should also look fine when sized down.

Now that you know the best YouTube thumbnail size and how to design better thumbnails, do you think you’ll revisit the thumbnails of your existing YouTube videos?

If you want to find a video editing solution that empowers your imagination and creativity yet takes less effort, please try this robust and user-friendly video editing software Wondershare Filmora. It provides special effects, stock photo & video, sound library, etc., which will definitely enhance your productivity and helps to make money by making videos much accessible.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Dec 30, 2022• Proven solutions

0

Making better YouTube thumbnails will help you get more views, and knowing the best YouTube thumbnail size is part of that. There are millions of videos on YouTube, so if you want the audience to click on yours, then you need to make a great first impression.

1. What’s the ideal YouTube thumbnail Size and Dimension?
2. Tips for Perfect Thumbnails
3. Making Better Thumbnails for YouTube

1. What’s the ideal YouTube thumbnail Size and Dimension?

An essential thing that every YouTube video developer needs to know is about the selection of the right side of the thumbnail for any video. As per the guidelines circulated by Google itself, the most appropriate size for the thumbnail image is 1280x720 pixels, where the recommended minimal pixel width is 640 pixels. Generally, the 16:9 ratio is considered as an ideal choice for Most of YouTube previews and players.

Here is one interesting thing that you need to know; the thumbnail of videos appears smaller during searches, but it naturally grows to the full size of a video during suggestions. Now the fact is that upscaling of images often loses the quality of content, whereas it is much easier to downscale larger images into smaller ones. Hence, the best idea is to use large size images so that this search and suggestion based scaling needs can be well accomplished.

You May Also Like:
Top 12 Best Free YouTube Thumbnail Makers >>
How to Download YouTube Thumbnail in 3 Ways [Online/Win/Mac] >>

2. Tips for Perfect Thumbnails

So, if you are ready to add thumbnails to your videos, then it is time to learn a few essential tips to do this task with improved impact. You need to ignore the blurry details and boost the eye-catching ones. Here are a few essential tips for developing the best videos with an impressive selection of thumbnail images:

YouTube’s Default Thumbnails

When you upload your video on YouTube, the platform itself gives you suggestions about thumbnails, and they are directly picked up from your own video. Although the idea is good and original, these thumbnails use to be of low quality with blur details. Hope! You don’t want to lose your audience with this bad selection.

Custom Thumbnails

This is probably the best choice for your customized videos, and the interesting thing is that here you can control everything manually with lots of useful effects.

First of all, you need to open your video on YouTube and then scrub a useful still from your video that you wish to use as a thumbnail.

Now, you need to take a screenshot of this particular instance of your video file. The best part is that most of the operating systems allow users to enjoy several shortcuts to complete this task. For example:

Mac users need to press Command+Shift+4 and then simply highlight the area that you want to include in your screenshot with the help of a frame. The system will automatically save your selected area to your desktop in the form of an image.

Window users are advised to access Windows Key with Print Screen option to get their desired screenshot.

Once you are ready with your video specific still image, then simply get it uploaded on YouTube using the edit video page.

3. Making Better Thumbnails for YouTube

The best part is to access some photo editing software tool to edit your image the way you like. You can use an advanced tool like Photoshop or a free online tool like Canva.

• Focus on Size:

It is always advised to create thumbnail images with standard video file size; the most commonly used standard size range is 1980x1080 or 1280x720. Images having a size smaller than this range may often appear blurry.

• Add Text:

The best idea is to use text-based editing for your thumbnail images and preferably add the title of your video to this image. It will naturally attract more viewers.

• Borders matter:

Professionals recommend adding borders around thumbnail images but do not try to make it too thick rather, try to make it noticeable with fine details.

• Background editing:

Most of the expert video thumbnail developers prefer to change the impact of thumbnail background by simply replacing the background color with solid colors. It will definitely attract more viewers and will bring major attention to the major subject.

• Test it before uploading:

Before uploading your customized thumbnail to your YouTube channel, prefer to check its final view. Zoom in to check the appearance of the thumbnail image on the larger screen, and it should also look fine when sized down.

Now that you know the best YouTube thumbnail size and how to design better thumbnails, do you think you’ll revisit the thumbnails of your existing YouTube videos?

If you want to find a video editing solution that empowers your imagination and creativity yet takes less effort, please try this robust and user-friendly video editing software Wondershare Filmora. It provides special effects, stock photo & video, sound library, etc., which will definitely enhance your productivity and helps to make money by making videos much accessible.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Dec 30, 2022• Proven solutions

0

Making better YouTube thumbnails will help you get more views, and knowing the best YouTube thumbnail size is part of that. There are millions of videos on YouTube, so if you want the audience to click on yours, then you need to make a great first impression.

1. What’s the ideal YouTube thumbnail Size and Dimension?
2. Tips for Perfect Thumbnails
3. Making Better Thumbnails for YouTube

1. What’s the ideal YouTube thumbnail Size and Dimension?

An essential thing that every YouTube video developer needs to know is about the selection of the right side of the thumbnail for any video. As per the guidelines circulated by Google itself, the most appropriate size for the thumbnail image is 1280x720 pixels, where the recommended minimal pixel width is 640 pixels. Generally, the 16:9 ratio is considered as an ideal choice for Most of YouTube previews and players.

Here is one interesting thing that you need to know; the thumbnail of videos appears smaller during searches, but it naturally grows to the full size of a video during suggestions. Now the fact is that upscaling of images often loses the quality of content, whereas it is much easier to downscale larger images into smaller ones. Hence, the best idea is to use large size images so that this search and suggestion based scaling needs can be well accomplished.

You May Also Like:
Top 12 Best Free YouTube Thumbnail Makers >>
How to Download YouTube Thumbnail in 3 Ways [Online/Win/Mac] >>

2. Tips for Perfect Thumbnails

So, if you are ready to add thumbnails to your videos, then it is time to learn a few essential tips to do this task with improved impact. You need to ignore the blurry details and boost the eye-catching ones. Here are a few essential tips for developing the best videos with an impressive selection of thumbnail images:

YouTube’s Default Thumbnails

When you upload your video on YouTube, the platform itself gives you suggestions about thumbnails, and they are directly picked up from your own video. Although the idea is good and original, these thumbnails use to be of low quality with blur details. Hope! You don’t want to lose your audience with this bad selection.

Custom Thumbnails

This is probably the best choice for your customized videos, and the interesting thing is that here you can control everything manually with lots of useful effects.

First of all, you need to open your video on YouTube and then scrub a useful still from your video that you wish to use as a thumbnail.

Now, you need to take a screenshot of this particular instance of your video file. The best part is that most of the operating systems allow users to enjoy several shortcuts to complete this task. For example:

Mac users need to press Command+Shift+4 and then simply highlight the area that you want to include in your screenshot with the help of a frame. The system will automatically save your selected area to your desktop in the form of an image.

Window users are advised to access Windows Key with Print Screen option to get their desired screenshot.

Once you are ready with your video specific still image, then simply get it uploaded on YouTube using the edit video page.

3. Making Better Thumbnails for YouTube

The best part is to access some photo editing software tool to edit your image the way you like. You can use an advanced tool like Photoshop or a free online tool like Canva.

• Focus on Size:

It is always advised to create thumbnail images with standard video file size; the most commonly used standard size range is 1980x1080 or 1280x720. Images having a size smaller than this range may often appear blurry.

• Add Text:

The best idea is to use text-based editing for your thumbnail images and preferably add the title of your video to this image. It will naturally attract more viewers.

• Borders matter:

Professionals recommend adding borders around thumbnail images but do not try to make it too thick rather, try to make it noticeable with fine details.

• Background editing:

Most of the expert video thumbnail developers prefer to change the impact of thumbnail background by simply replacing the background color with solid colors. It will definitely attract more viewers and will bring major attention to the major subject.

• Test it before uploading:

Before uploading your customized thumbnail to your YouTube channel, prefer to check its final view. Zoom in to check the appearance of the thumbnail image on the larger screen, and it should also look fine when sized down.

Now that you know the best YouTube thumbnail size and how to design better thumbnails, do you think you’ll revisit the thumbnails of your existing YouTube videos?

If you want to find a video editing solution that empowers your imagination and creativity yet takes less effort, please try this robust and user-friendly video editing software Wondershare Filmora. It provides special effects, stock photo & video, sound library, etc., which will definitely enhance your productivity and helps to make money by making videos much accessible.

CollageIt Pro

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Dec 30, 2022• Proven solutions

0

Making better YouTube thumbnails will help you get more views, and knowing the best YouTube thumbnail size is part of that. There are millions of videos on YouTube, so if you want the audience to click on yours, then you need to make a great first impression.

1. What’s the ideal YouTube thumbnail Size and Dimension?
2. Tips for Perfect Thumbnails
3. Making Better Thumbnails for YouTube

1. What’s the ideal YouTube thumbnail Size and Dimension?

An essential thing that every YouTube video developer needs to know is about the selection of the right side of the thumbnail for any video. As per the guidelines circulated by Google itself, the most appropriate size for the thumbnail image is 1280x720 pixels, where the recommended minimal pixel width is 640 pixels. Generally, the 16:9 ratio is considered as an ideal choice for Most of YouTube previews and players.

Here is one interesting thing that you need to know; the thumbnail of videos appears smaller during searches, but it naturally grows to the full size of a video during suggestions. Now the fact is that upscaling of images often loses the quality of content, whereas it is much easier to downscale larger images into smaller ones. Hence, the best idea is to use large size images so that this search and suggestion based scaling needs can be well accomplished.

You May Also Like:
Top 12 Best Free YouTube Thumbnail Makers >>
How to Download YouTube Thumbnail in 3 Ways [Online/Win/Mac] >>

2. Tips for Perfect Thumbnails

So, if you are ready to add thumbnails to your videos, then it is time to learn a few essential tips to do this task with improved impact. You need to ignore the blurry details and boost the eye-catching ones. Here are a few essential tips for developing the best videos with an impressive selection of thumbnail images:

YouTube’s Default Thumbnails

When you upload your video on YouTube, the platform itself gives you suggestions about thumbnails, and they are directly picked up from your own video. Although the idea is good and original, these thumbnails use to be of low quality with blur details. Hope! You don’t want to lose your audience with this bad selection.

Custom Thumbnails

This is probably the best choice for your customized videos, and the interesting thing is that here you can control everything manually with lots of useful effects.

First of all, you need to open your video on YouTube and then scrub a useful still from your video that you wish to use as a thumbnail.

Now, you need to take a screenshot of this particular instance of your video file. The best part is that most of the operating systems allow users to enjoy several shortcuts to complete this task. For example:

Mac users need to press Command+Shift+4 and then simply highlight the area that you want to include in your screenshot with the help of a frame. The system will automatically save your selected area to your desktop in the form of an image.

Window users are advised to access Windows Key with Print Screen option to get their desired screenshot.

Once you are ready with your video specific still image, then simply get it uploaded on YouTube using the edit video page.

3. Making Better Thumbnails for YouTube

The best part is to access some photo editing software tool to edit your image the way you like. You can use an advanced tool like Photoshop or a free online tool like Canva.

• Focus on Size:

It is always advised to create thumbnail images with standard video file size; the most commonly used standard size range is 1980x1080 or 1280x720. Images having a size smaller than this range may often appear blurry.

• Add Text:

The best idea is to use text-based editing for your thumbnail images and preferably add the title of your video to this image. It will naturally attract more viewers.

• Borders matter:

Professionals recommend adding borders around thumbnail images but do not try to make it too thick rather, try to make it noticeable with fine details.

• Background editing:

Most of the expert video thumbnail developers prefer to change the impact of thumbnail background by simply replacing the background color with solid colors. It will definitely attract more viewers and will bring major attention to the major subject.

• Test it before uploading:

Before uploading your customized thumbnail to your YouTube channel, prefer to check its final view. Zoom in to check the appearance of the thumbnail image on the larger screen, and it should also look fine when sized down.

Now that you know the best YouTube thumbnail size and how to design better thumbnails, do you think you’ll revisit the thumbnails of your existing YouTube videos?

If you want to find a video editing solution that empowers your imagination and creativity yet takes less effort, please try this robust and user-friendly video editing software Wondershare Filmora. It provides special effects, stock photo & video, sound library, etc., which will definitely enhance your productivity and helps to make money by making videos much accessible.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett